Deberia dejarte grabar sin problemas ya que sus caracteristicas son:
Formatos Compatibles:
Regrabadora Super Multi DVD interna LightSribe con SecurDisc
DVD-R
DVD-RW
DVD-RAM
DVD+R
DVD+R Double Layer
DVD-R Dual Layer
DVD+RW
CD-R/-RW
Tamaño de buffer 2 MB Generales
Bien por lo que estado indagando por hay parece que en ciertas placas y sistemas operativos da algunos problemas y existe un FirmWare de actualización:
LG has finally released some firmware updates for the GSA-H55L and GSA-H55N.
GSA-H55L 1.01 -
http://lgodd.lge.com/fwdrv/DVD-WRITER/GSA-H55L_101.exe
GSA-H55L 1.02 -
http://lgodd.lge.com/fwdrv/DVD-WRITER/GSA-H55L_102.exe
GSA-H55N 1.01 -
http://lgodd.lge.com/fwdrv/DVD-WRITER/GSA-H55N_101.exe
GSA-H55N 1.02 -
http://lgodd.lge.com/fwdrv/DVD-WRITER/GSA-H55N_102.exe
no especifica cambios en la version.
Antes de Actualizar el FirmWare lee estas instrucciones de la Pagina Oficial:
(esta en ingles)
Readme
GSA-H55L Version 1.01 Firmware Update
To update the firmware of the GSA-H55L please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below 1.00.
The drives must be original LG branded drives with the DVD Writer model number
GSA-H55L(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC¡¯s with Windows Vista, Windows XP
and Windows 2000.
¡Ø Critical Instructions: (to be followed carefully)
1. Connect the drive as¡°master¡±by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the¡°master¡±position.
2. Download the file GSA-H55L_101(EW).ZIP to a folder of your choice.
This download includes this¡°Read me(ew)¡±text file,
as well as the GSAH55L_101.EXE program, which will auto-update your drive's firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray before you start
the update procedure.
5. Go into the folder with the update file and double click the GSAH55L_101.EXE program
and click the¡°update¡±button. Once the update is complete,
you will see Firmware Update Complete and advise you to reboot the system.
You will need to reboot your PC.
The update will be complete, after you reboot your system.
WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
en algunas ocasiones si es necesario actualizar algun componente, si este es tu caso, no lo se, aparte podrias decirnos que placa base tienes y cables de conexion de datos a la grabadora (Ide 40 u 80) y como tienes tanto el disco duro y la grabadora configurada (los Jumpers o puentes) aparte de decirnos en que bus IDE los tienes montados ya que la mejor opcion es siempre en los dos Buses IDE los HDD como Master y las Grabadoras como Slave.
Saludos.